Single sign-on service and support libries for Lucuma.

SSO requires the following configuration in staging/production.

SSO signs JWTs with a private key. Client applications verify JWTs with a public key.

The following configuration is provided by Heroku. You must enable the runtime-dyno-metadata extension to get the full set.

• Post to /api/v1/refresh-token
  • If you get a 403 Forbidden you are not logged in.
    • Continue with Login below.
  • If you get a 200 Ok
    • You are logged in.
    • The response body will contain a new JWT.
    • Set a timer to run Initialization again one minute before the JWT expires.
    • Continue with Normal Operation below.

The user must be allowed to choose to log in with ORCID (as a standard user) or log in as a guest. Service users are not interactive users and cannot log in.

Standard users will always be logged in under a PI role. If the user has no such role (possible but unusual) it will be created. The user can later switch to a different role (see Set Role below) and this choice will be peristed in the refresh token. Associating the role with the refresh tokan allows a user to be logged in under several roles at the same time, in different browser sessions.

• Post to /api/v1/auth-as-guest
  • The response will be 201 Created.
  • The body will contain a JWT.
  • An http-only refresh cookie will be set.
  • Continue with Normal Operation below.

• Perform a client-side redirect to /auth/v1/stage1?state=APP_URI
  • On success the user will be redirected to APP_URI.
    • An http-only refresh cookie will be set.
    • Continue with Initialization above.

• Store the JWT in a variable and pass it to all API requests in the header as Authorization: Bearer <jwt>.
• Decode the JWT body as a lucuma.core.model.User. A circe codec is provided by the lucuma-sso-frontend-client artifact.
• If the user has insufficient privileges to view the application, there are three possibilities that should be presented.
  • If the user is currently a Guest
    • allow the user to upgrade their guest account (ORCID Login above).
  • If the user has other roles that are sufficient (via the otherRoles member on StandardUser)
    • Provide a menu that allows the user to select one of these roles
    • Continue with Set Role below.
  • Offer the option to log out.
    • Continue with Log Out below.
• Display a user menu with the user's displayName shown.
  • If the user is a guest, offer an option to log in via ORCID.
  • If the user is a standard user, offer the option to change role.
  • Offer an option to log out.

• POST to https://sso.lucuma.gemini.edu/api/v1/logout
• POST to https://orcid.org/userStatus.json?logUserOut=true (we need to test this)
• Continue with Login above.

• GET /auth/v1/set-role?role=<role-id> to start a new session with the same user in a different role (taken from the user's otherRoles collection).
  • This will set a new session cookie.
  • The response body will contain a new JWT.
  • Continue with Normal Operation above.

• See the backend-client-example module for an example of what follows.
• Add lucuma-sso-backend-client as a dependency.
• Ensure that your app is provided with the following configuration information:
  • Your SSO server's root URL (https://sso.foo.com for example)
  • Your SSO server's public key in GPG ASCII-armored format. For now you can grab this from the SSO server's Heroku configuration. We may change this to use a keyserver.
  • Your service JWT (see below).
• Construct an SsoClient using this configuration and make it available to your HTTP routes.
• Use the SsoClient to extract the requesting user from the http Request as needed.

Each back-end service must have its own service JWT for communicating with other services. SsoClient must communicate with SSO to exchange API tokens, so SsoClient users need a service token. You can obtain one by running a one-off Heroku dyno command from your SSO server. The service-name argument is arbitrary but should identify your application for logging purposes (observing-database, facility-service, etc).

heroku run -a <sso-app-name> create-service-user <service-name>

It is possible to implement authentication as a middleware, but this makes composition of routes via <+> difficult because the middleware can either (a) reject unauthorized requests with 403 Forbidden, which means no following routes can possibly match; or (b) ignore unauthorized requests, which means the user will see a 404 Not Found instead of 403 Forbidden. So the recommended strategy for now is to check authorization on each route as described above.

• Step 1 is chmod 0600 test-cert/*
• Edit /etc/hosts to add local.lucuma.xyz as an alias of localhost.

127.0.0.1       localhost local.lucuma.xyz

Use docker-compose to wrangle a dev database. It's way easier than dealing with a real installation.

To run locally you need to clean out the default database. If you're just running tests the default db is fine.

psql -h localhost -d postgres -U jimmy -c 'drop database "lucuma-sso"'
psql -h localhost -d postgres -U jimmy -c 'create database "lucuma-sso"'

Docker-compose also starts up a local nginx server that serves an example client application at:

• http://local.lucuma.xyz:8081/playground.html

The app runs the migrations in /modules/service/src/main/resources/db/migration on startup.

You can connect to youe dev database with locally-installed tools like pgAdmin and psql as follows. Note that it's important to explicitly specify localhost as the host, for example psql -h localhost -d lucuma-sso -U jimmy.

If you try to run Main you will find that it barfs because it needs some ORCID configuration. To set this up, sign into ORCID as yourself, go to Developer Tools under the name menu and create an API key with redirect URL http://localhost:8080/auth/v1/stage2. This will allow you to test ORCID authentication locally.

You will need to provide GPP_ORCID_CLIENT_ID and GPP_ORCID_CLIENT_SECRET either as environment variables or system properties when you run Main. To do this in VS-Code you can hit F5 and then set up a run configuration as follows after which hitting F5 again should run SSO locally. Output will be in the Debug Console window.

{
  "version": "0.2.0",
  "configurations": [
    {
      "type"       : "scala",
      "request"    : "launch",
      "name"       : "Lucuma SSO",
      "mainClass"  : "lucuma.sso.service.Main",
      "args"       : [],
      "buildTarget": "service",
      "jvmOptions" : [
        "-DLUCUMA_ORCID_CLIENT_ID=<client-id>",
        "-DLUCUMA_ORCID_CLIENT_SECRET=<client-secret>",
      ],
    }
  ]
}